Liaoning Jiuding Hongtai Waterproof Technology CO., Ltd.


One Component Polyurethane Waterproof Coating

Waterproof Coating / Regular Products

JDHT One component polyurethane waterproof coating is made out of isocyanate and polyether polyol, together with various additives. Coating on the waterproof base layer, after chemical reaction of polyurethane prepolymer and moisture in the air, it forms a continuous, jointless, rubber-like waterproof film.


1.One component, ready to use;

2.High-strength, high elongation, high resilience (shrinkage or cracking) properties;

3.Excellent bonding property, applicable on various substrates;

4.Eco-friendly, contains no coal tar nor toxic solvents.


Basement floors

side walls and decks, roofs, kitchens, bathrooms, swimming pools

railways and metros.

Application information

1.Surface Preparation, surface must be sound, clean and dry. Remove dust, standing water, grease. All projections, rough spots, etc. should be dressed off to achieve a level surface prior to application.

2.Application, apply at the recommended coverage rate using a notched squeegee or scrubbing brush. Coating thickness is 1.5mm-2.0mm, it should be backrolled for 3-4 times, one perpendicular to the other, each time coating not more than 0.5mm. Allow coating to cure or until tack free before overcoating.


Package & Storage


2.Store indoors at cool, ventilated place, storage temperature between 5℃ and 40℃.

Related Products